Double Long Throw SECURITY Gate Lock Garage Bolt Rim Lock 5 KEYS 50 MM

Designed for single or double gates. Key lockable from both sides of gate with 5 keys, the unique bolt design with hardened steel core and ss escutcheon plate has an extremely high corrosion resistance. Grade 316 stainless steel shoot bolt, and elongated anti-rattle keep prevent rattling during windy weather. For use with single or double gate Lockable from both sides of gate Clear fitting instructions and Template Fitting template included for left or right hand installation Max gate thickness 50mm High corrosions resistance Anti-rattle Drill/driver bits and stainless screws included Fitting Instructions Step One: The lock should be fitted to the door or gate once it has been hung and all necessary adjustments have been made. The lock body should be mounted inside (secure side) of the gate, with just the barrel showing outside - to prevent any tampering with the lock Step Two: Work out the position the lock should be mounted and mark affix the template. The lock body should be no less 5mm from the edges of the gate and obviously the throw of the lock needs to reh ross to secure the gate. Also Check on the other side of the gate to ensure the hole is in a suitable position. Step Three: Using the drill bit plied make sure the hole is drilled level and straight for the best performance of the lock. Drill through until the central point of the drill bit protrudes out on the bk and then finish the hole off from the bk side to avoid splintering the timber.