Garden Water Pump High Pressure 2500W Multi Stage Tank Rain Irrigation Black

When low water pressure gets you down, power it up with the 5-stage Water Pump. It's the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You'll find our 5-stage water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The 5-stage Water Pump features an IP rated commercial motor, full stainless steel pump body, cast iron ends, one-inch inlet and outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in run-dry thermal protection. Pumping out at a rate of 9000L/hr with a 64m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any 240V socket. Whether you're using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one. Features Powerful 2500W self-priming multi-stage pump Garden irrigation, farm irrigation home water supply 100% duty cycle - Designed for continuous operation Rust resistant stainless steel pump body w/ cast iron ends Fully automatic operation on/off controller Huge 64m head - Perfect for applications over two stories Anti-corrosive alloy motor housing, ceramic and carbon seals Built-in thermal protection Efficient cooling system Highly conductive copper motor Efficient low heat generation Corrossion resistant brass connector Leak proof rubber ring Easy connecting plug and cable Fully automatic pressure controller Adjustable start-up pressure Australian standard cable and plug 1 year warranty We are always ready to back you up Specifications: Pump: Maximum Power: 2500W / 3.5HP Maximum Flow: 150L/min, 9,000L/hr Maximum Head: 64m Stage: 5 stages Plug Cord: SAA 250V/10A *0.6m Brass connector: 1" Inlet/outlet: 1" Casing: stainless steel Motor: Copper wire Protection class: IP44 Mechanical Seal: Ceramic/ Carbon Controller: Voltage: 220/240V Frequency: 50/60Hz Maximum current: 10A Maximum water temperature: 60 degrees Starting pressure: 1.5-3 bar Maximum. pressure for use: 10 bar Protection grade: IP65 Inlet and outlet size: 1" (25mm) Dimensions: 22 x 15 x 15cm Colour: Black Pump weight: 15.5kg Controller weight: 1.5kg Package Content (1) 5 Stage Water Pump x1 (1) Pump Controller x1 This product comes with 1 year warranty